FISCHER FISCHERSCOPE X-RAY XDLM 231, Operator'S Manual

Page: 76 / 236

Setting Up the Print Form Using PDM Variables Available for Block Evaluation
74 FISCHERSCOPE
®
X-RAY
Example “Dual coating measurement”
Top coating thickness = 1 and intermediate coating thickness = 2
List of variables for block evaluation:
@ANBOrder number of the selected block
or the information that has been entered into the first entry
field of the dialog window “Order No./ Operator”.
@ANRNumber of the current product.
Regarding the numerals
1; 2; 3 … after certain
variables:
A measurement consists
of one or more single
readings (“channels”) that
are identified by consecu-
tive numbers (1,2,3).
Example “Dual coating
measurement”
Top coating thickness = 1
Intermediate coating
thickness = 2
@ARTName of the current product.
@BDTDate of the selected block, i.e., the date, when the last
measurement of the block was taken.
@BM1Lot number of the selected block
or the information that has been entered into the entry field
of the dialog window “Order No./ Operator”.
@BNRBlock number of the selected block.
@BTMTime of the selected block.
That is, the time when the last measurement of a block
was taken.
@CK1Critical process capability index C
pk
Prerequisites for computing and inserting the
process capability indexes:
1) The control box “with Cp and Cpk” from the product tab
“Presentation” (“Product > Modify product”) is checked and
2) The control box “Specification limits” is checked.
@CP1Process capability index C
p
Prerequisites for computing and inserting the
process capability indexes:
1) The control box “with Cp and Cpk” from the product tab
“Presentation” (“Product > Modify product”) is checked and
2) The control box “Specification limits” is checked.