FISCHER FISCHERSCOPE X-RAY XDLM 231, Operator'S Manual

Page: 137 / 236

FISCHERSCOPE ® X-RAY 135
Programming Coordinates for Automatic Measurements (XDLM 237)
17.4 Traveling to any Desired Position
Using the window Go to XY(Z) position , you can control the measuring stage from the screen.
Opening the XY position window
►
To open the window, choose XY(Z)-Axis > Move to Position .
The window remains open even if you perform other functions or enter other commands.
Moving the measuring stage in the relative coordinates mode
►
In the entry fields X , Y and Z , enter the desired relative travel paths and click Move to .
With every click on Move to , the measuring stage travels the desired distance in the respective
direction(s), measured relative to the last current position.
Moving the measuring stage in the absolute coordinates mode
1. In the field Input coordinates , click Absolute .
The current, absolute position values appear in the entry fields X , Y and Z . The Home position
of the measuring stage is the zero point of the coordinates system 0/0/0.
2. In the entry fields X, Y and Z , enter the desired absolute target coordinates and click Move to .
The measuring stage will visit the desired absolute target coordinates.
Moving the measuring stage using the control field XY-Axis and Z-Axis
1. Enter the desired travel path in the entry field in the center of the four direction arrow command
buttons.
2. Click on a direction arrow button.
With every click on a direction arrow button, the measuring stage travels the desired distance
in the respective direction, measured relative to the last current position.