Eaton ELC-PB, Programming Manual

Page: 173 / 728

E L C P r o g r a m m i n g M a n u a l
F o r m o r e i nf o r m a t i o n v i sit :
w w w. e a t o n . c o m
MN05003003E
3-4
Program Example:
X0 X1
Y1
Instruction: Operation:
LDI X1 ; Load contact B of X1
AND X0
; Connect to contact A of X0 in series
OUT Y1 ; Drive Y1 coil
Mnemonic Operands Function Program steps
ANI X, Y, M, S, T, C Series connection- B contact 1
ELC ELCB ELCM
PB PC/PA/PH PV PB PH/PA
Descriptions:
The ANI command is used in the series connection of a B contact.
Program Example:
X0 X1
Y1
Instruction: Operation:
LD X1 ; Load contact A of X1
ANI X0
; Connect to contact B of X0 in series
OUT Y1 ; Drive Y1 coil
Mnemonic Operands Function Program steps
OR X, Y, M, S, T, C Parallel connection- A contact 1
ELC ELCB ELCM
PB PC/PA/PH PV PB PH/PA
Description:
The OR command is used in the parallel connection of an A contact.
Program Example:
X0
X1
Y1
Instruction: Operation:
LD X0 ; Load contact A of X0
OR X1
; Connect to contact A of X1 in parallel
OUT Y1 ; Drive Y1 coil
Mnemonic Operands Function Program steps
ORI X, Y, M, S, T, C Parallel connection- B contact 1
ELC ELCB ELCM
PB PC/PA/PH PV PB PH/PA
Description:
The ORI command is used in the parallel connection of a B contact.