Eaton ELC-PB, Programming Manual

Page: 437 / 728

E L C P r o g r a m m i n g M a n u a l
F o r m o r e i nf o r m a t i o n v i sit :
w w w. e a t o n . c o m
MN05003003E
3-268
Results of using adjusted parameters generated by initial auto-tuning function.
From the figure above, we can see that the temperature control after auto-tuning is working
fine and it used only approximately 20 minutes for the control. Next, we modify the target
temperature from 80°C to 100°C and obtain the result below.
From the result above, we can see that when the parameter is 100°C, temperature control works
fine and requires only 20 minutes which is the same as that in 80°C above.