Eaton ELC-PB, Programming Manual

Page: 51 / 728

EL C Pro g rammi ng Manu al
F O R MORE INFORM AT ION VISIT: WWW.E ATON.COM MN05003003E 2-22
SM
Function
ELC
-PB
ELCB
-PB
ELC
-PC
-PA
-PH
ELCM
-PH
-PA
ELC
-PV
OFF
Ø
ON
STOP
Ø
RUN
RUN
Ø
STOP
Type Latched
Factory
setting
M1043 Zero point return completed Y Y Y Y OFF - OFF R/W NO OFF
M1044 Zero point condition Y Y Y Y OFF - OFF R/W NO OFF
M1045 All outputs clear inhibit Y Y Y Y OFF - - R/W NO OFF
M1046 STL state setting (ON) Y Y Y Y OFF - - R NO OFF
M1047 STL monitor enable - Y Y Y OFF - - R/W NO OFF
M1048 Flag for alarm point state - Y Y Y OFF - - R NO OFF
M1049 Monitor flag for alarm point - Y Y Y OFF - - R/W NO OFF
M1050 I000/I001 masked Y Y Y - OFF - - R/W NO OFF
M1051 I100/I101 masked Y Y Y - OFF - - R/W NO OFF
M1052 I200/I201 masked Y Y Y - OFF - - R/W NO OFF
M1053 I300/I301 masked Y Y Y - OFF - - R/W NO OFF
M1054 I400/I401 masked - Y Y - OFF - - R/W NO OFF
M1055 I500/I501 masked - Y Y - OFF - - R/W NO OFF
M1056 I602~ I699 masked Y Y Y - OFF - - R/W NO OFF
M1057 I702~I799 masked - Y Y - OFF - - R/W NO OFF
M1058 COM3 monitor request - - Y - OFF - - R/W NO OFF
I010~I060 masked
- Y - -
M1059 Disable high-speed counter interruptions
I010~I080
- - Y -
OFF - - R/W NO OFF
M1060 System error message 1 Y Y Y Y OFF - - R NO OFF
M1061 System error message 2 Y Y Y Y OFF - - R NO OFF
M1062 System error message 3 Y Y Y Y OFF - - R NO OFF
M1063 System error message 4 Y Y Y Y OFF - - R NO OFF
M1064 Operator error Y Y Y Y OFF OFF - R NO OFF
M1065 Syntax error Y Y Y Y OFF OFF - R NO OFF
M1066 Program error Y Y Y Y OFF OFF - R NO OFF
M1067 Program execution error Y Y Y Y OFF OFF - R NO OFF
M1068 Execution error latched (D1068) Y Y Y Y OFF - - R NO OFF
Y1 time base switching for PWM
instruction (ON: 100us; OFF: 1ms)
Y Y Y -
M1070 Y0 time base switching for PWM
instruction (ON: 100us; OFF: 1ms) when
ON, D1371 will decide the time base)
- - - Y
OFF - - R/W NO OFF
M1090
Matrix search start flag. Compare from
the first bit and M1090=1.
- Y Y Y OFF OFF - R NO OFF