Eaton ELC-PB, Programming Manual

Page: 678 / 728

3 . I n s t r u c t i o n S e t
M N 0 5 0 0 3 0 0 3 E F o r m o r e i n f o r m a t i o n v i s i t : w w w. e a t o n . c o m
3 - 5 0 9
API Mnemonic Operands Function
267 D BSET D, n Set ON Specified Bit of a Word
Bit Devices Word devices Program Steps
Type
OP
X Y M S K H KnX KnY KnM KnS T C D E F
D * * * * * *
n * * * * * * * * * * *
BSET: 5 steps
DBSET: 9 steps
ELC ELCB ELCM
PB PC/PA/PH PV PB PH/PA
32 16 P 32 16 P 32 16 P 32 16 P 32 16 P
Operands:
D : Destination address to be Set ON n : Value specifying the bit to be Set ON
Description:
1. Available range for the value in operand n : K0~K15 for the 16-bit instruction; K0~K31 for the
32-bit instruction.
2. When the BSET instruction executes, the output device specified by operand n will be turned
ON and latched. To reset the ON state of the device, BRST instruction is required.
Program Example:
X0 X1
BSET K4Y0 D0
Instruction: Operation:
LDI X0 ; Load NC contact X0
AND X1 ; Connect NO contact
X1 in series.
BSET K4Y0 D0 ; When D0 = k1,
Y1 is ON and latched
; When D0 = k2,
Y2 = ON and latched