Eaton ELC-PB, Programming Manual

Page: 299 / 728

E L C P r o g r a m m i n g M a n u a l
F o r m o r e i nf o r m a t i o n v i sit :
w w w. e a t o n . c o m
MN05003003E
3-130
M1000
DCNT
C243 K100
EI
FEND
I101
M1000
IRET
END
DMOV
D1240 D0
6. Special registers for relevant flags and settings of high speed counters:
Flag Function
M1059 Disable high-speed counter interruptions I010~I080
M1150 DHSZ instruction in multiple set values comparison mode
M1151 The execution of DHSZ multiple set values comparison mode is completed.
M1152 Set DHSZ instruction as frequency control mode
M1153 DHSZ frequency control mode has been executed.
M1181
PH/PC: Reset the high speed counting value from X0 when the interrupt is
triggered from X2/ I201. (The counting value will be moved to D1180/D1181
before it is reset).
M1182
PH/PC: Reset the high speed counting value from X1 when interrupt is
triggered from X3/ I301. (The counting value will be moved to D1198/D1199
before it is reset).
M1232 ~
M1245
Designating the counting direction of high speed counters C232 ~ C245
When M12
□□
= Off, C2
□□
will count up.
When M12
□□
= On, C2
□□
will count down.
M1246 ~
M1255
Monitor the count direction of high speed counters C246 ~ C255
When M12
□□
= Off, C2
□□
will count up.
When M12
□□
= On, C2
□□
will count down.
M1260
ELC-PC/PA/PH: X5 is the reset input signal of the global reset of C235~C239
ELCM-PH/PA: Let X7 be the reset input signal of high-speed counters
C235~C241
M1261 High-speed comparison flag for DHSCR instruction
M1264 Disable the external control signal input point of HHSC0 reset signal point (R)
M1265 Disable the external control signal input point of HHSC0 start signal point (S)
M1266 Disable the external control signal input point of HHSC1 reset signal point (R)
M1267 Disable the external control signal input point of HHSC1 start signal point (S)
M1268 Disable the external control signal input point of HHSC2 reset signal point (R)