Eaton ELC-PB, Programming Manual

Page: 133 / 728

EL C Pro g rammi ng Manu al
F O R MORE INFORM AT ION VISIT: WWW.E ATON.COM MN05003003E 2-104
2. When the ELC program scans to END command, it will automatically check whether this
function needs to be activated.
3. When M1133 and M1135 are set in the same scan period, the two axes will output pulses
simultaneously.
4. When the output frequency is less than 100Hz, the output will be executed by 100Hz. When
the output frequency is larger than 100kHz, the output will be executed by 100kHz.
5. Only D0 ~ D999 and D2000 ~ D4999 can be used for this function. DO NOT use other
devices or exceed the range of D.
6. The maximum number of segments for this function is 50. When the number of segment
numbers is less than 1 or larger than 50, this function will be disabled.
7. After activating this function, M1102=ON indicates Y10 output is END and M1103=ON
indicates Y11 output is END.
Example1: Draw oblique line
1. Destination: draw two oblique lines as follows:
(0,0)
(1000,3000)
(5000,4000)
2 Segment
1Segment
1Segment 2 Segment
Y axis
X axis
2. Program explanation: Y0 and Y10 are for X-axis; Y1 and Y11 are for Y-axis as follows:
M1002
M0
MOV K200
K2
K300
Y0
M1133
Y1
M1135
MOV
MOV
MOV
K2
D1133
D1134
D1135
D1136
3. Output frequency and number: setting as follows: