Eaton ELC-PB, Programming Manual

Page: 653 / 728

E L C P r o g r a m m i n g M a n u a l
F or more info rmat io n vi sit: www.e a to n.c om M N 0 5 003 00 3 E
3-484
4. ELCM-PH/PA Special register explanations:
D1026: Pulse number for masking Y0 when M1156 = ON (Low word). The function is
disabled when set value
≦
0. (Default = 0 )
D1027: Pulse number for masking Y0 when M1156 = ON (High word). The function is
disabled when set value
≦
0. (Default = 0 )
D1135: Pulse number for masking Y2 when M1156 = ON (Low word). The function is
disabled when set value
≦
0. (Default = 0 )
D1136: Pulse number for masking Y2 when M1156 = ON (High word). The function is
disabled when set value
≦
0. (Default = 0 )
D1030: Low word of the present value for CH0 (Y0, Y1) pulse output
D1031: High word of the present value for CH0 (Y0, Y1) pulse output
D1131:
Input/output percentage value for CH0 (Y0, Y1) close loop control. Default:
K100
D1132:
Input/output percentage value for CH1 (Y2, Y3) close loop control. Default:
K100
D1244:
Idle time (pulse number) setting for CH0 (Y0, Y1) The function is disabled if set
value
≦
0.
D1245:
Idle time (pulse number) setting for CH2 (Y2, Y3) The function is disabled if set
value
≦
0.
D1336: Low word of the present value for CH1 (Y2, Y3) pulse output
D1337: High word of the present value for CH1 (Y2, Y3) pulse output
D1340:
Start/end frequency of the 1st group of pulse outputs CH0 (Y0, Y1). Default:
K100
D1352:
Start/end frequency of the 2st group of pulse outputs CH1 (Y2, Y3). Default:
K100
D1343:
Ramp up/down time of the 1st group of pulse outputs CH0 (Y0, Y1). Default:
K100
D1353:
Ramp up/down time of the 2nd group of pulse outputs CH1 (Y2, Y3). Default:
K100
D1348: CH0(Y0, Y1) pulse output. When M1534 = ON, D1348 stores the ramp-down
time. Default: K100
D1349: CH1(Y2, Y3) pulse output. When M1535 = ON, D1349 stores the ramp-down
time. Default: K100