Cisco XR 1200 series Command Reference Manual Download Page 348

Page: 348 / 432

logging suppress deprecated

To prevent the logging of messages to the console to indicate that commands are deprecated, use the

logging

suppress deprecated

command in global configuration mode. To remove the

logging suppress deprecated

command from the configuration file, use the

form of this command.

logging suppress deprecated

no logging suppress deprecated

Syntax Description

This command has no keywords or arguments.

Command Default

Console messages are displayed when deprecated commands are used.

Command Modes

Global configuration

Command History

Modification

Release

This command was introduced.

Release 3.5.0

Usage Guidelines

The

logging suppress deprecated

command affects messages to the console only.

Task ID

Operations

Task ID

read, write

logging

Examples

This example shows how to suppress the consecutive logging of deprecated messages:

RP/0/0/CPU0:router(config)#

logging suppress deprecated

Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1

336

OL-24735-01

Logging Services Commands

logging suppress deprecated

Summary of Contents for XR 1200 series

















































































































































































































































































































































































































































Search results

Summary of Contents for XR 1200 series

Reviews:

Related manuals for XR 1200 series

Brands by name

Popular brands

Cisco XR 1200 series, Command Reference Manual

Search results

Summary of Contents for XR 1200 series

Reviews:

Related manuals for XR 1200 series

Brands by name

Popular brands