Cisco XR 1200 series Command Reference Manual Download Page 238

Page: 238 / 432

show ipsla mpls lsp-monitor lpd

To display LSP Path Discovery (LPD) operational status, use the

show ipsla mpls lsp-monitor lpd

command

in EXEC mode.

show ipsla mpls lsp-monitor lpd

{

statistics

[

group-ID

aggregated group-ID

summary group

}

Displays statistics for the specified LPD group,
including the latest LPD start time, return code,
completion time, and paths.

statistics group-ID

Displays the aggregated statistics of the LPD group.

aggregated group-ID

Displays the current LPD operational status, which
includes LPD start time, return code, completion time,
and all ECMP path information.

summary group- ID

Command Default

None

Command Modes

EXEC

Command History

Modification

Release

This command was introduced.

Release 3.6.0

Usage Guidelines

For the aggregated group ID, a maximum of two buckets are allowed.

Task ID

Operations

Task ID

read

monitor

Examples

The following sample output is from the

show ipsla mpls lsp-monitor lpd statistics

command:

RP/0/0/CPU0:router#

show ipsla mpls lsp-monitor lpd statistics 10001

Group ID: 100001

Latest path discovery start time

: 00:41:01.129 UTC Sat Dec 10 2005

Latest path discovery return code

: OK

Latest path discovery completion time (ms): 3450
Completion Time Values:

NumOfCompT: 1

CompTMin: 3450

CompTMax : 3450

CompTAvg: 3450

Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1

226

OL-24735-01

IP Service Level Agreement Commands

show ipsla mpls lsp-monitor lpd

Summary of Contents for XR 1200 series

















































































































































































































































































































































































































































Search results

Summary of Contents for XR 1200 series

Reviews:

Related manuals for XR 1200 series

Brands by name

Popular brands

Cisco XR 1200 series, Command Reference Manual

Search results

Summary of Contents for XR 1200 series

Reviews:

Related manuals for XR 1200 series

Brands by name

Popular brands