Cisco XR 1200 series Command Reference Manual Download Page 64

Page: 64 / 432

show logging correlator rule

To display defined correlation rules, use the

show logging correlator rule

command in EXEC mode.

show logging correlator rule

{

all

correlation-rule1

...

correlation-rule14

} [

context context1

...

context 6

]

[

location node-id1

...

node-id6

] [

rulesource

{

internal| user

}] [

ruletype

{

nonstateful| stateful

}] [

summary|

detail

]

Syntax Description

Displays all rule sets.

all

Rule set name to be displayed. Up to 14 predefined correlation rules
can be specified, separated by a space.

correlation-rule1

...

correlation-rule14

(Optional) Displays a list of context rules.

context context1...context 6

(Optional) Displays the location of the list of rules filter from the
designated node. The

node-id

argument is entered in the

rack/slot/module

notation.

location node-id1...node-id6

(Optional) Displays the rulesource filter.

rulesource

(Optional) Displays the internally defined rules from the rulesource
filter.

internal

(Optional) Displays the user defined rules from the rulesource filter.

user

(Optional) Displays the ruletype filter.

ruletype

(Optional) Displays the nonstateful rules.

nonstateful

(Optional) Displays the stateful rules.

stateful

(Optional) Displays the summary information.

summary

(Optional) Displays detailed information.

detail

Command Default

None

Command Modes

EXEC

Command History

Modification

Release

This command was introduced.

Release 3.2

Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1

OL-24735-01

Alarm Management and Logging Correlation Commands

show logging correlator rule

Summary of Contents for XR 1200 series

















































































































































































































































































































































































































































Search results

Summary of Contents for XR 1200 series

Reviews:

Related manuals for XR 1200 series

Brands by name

Popular brands

Cisco XR 1200 series, Command Reference Manual

Search results

Summary of Contents for XR 1200 series

Reviews:

Related manuals for XR 1200 series

Brands by name

Popular brands