type udp jitter
To use the UDP jitter operation type, use the
type udp jitter
command in IP SLA operation configuration
mode. To remove the operation, use the
no
form of this command.
type udp jitter
no type udp jitter
Syntax Description
This command has no keywords or arguments.
Command Default
None
Command Modes
IP SLA operation configuration
Command History
Modification
Release
This command was introduced.
Release 3.3.0
Usage Guidelines
Task ID
Operations
Task ID
read, write
monitor
Examples
The following example shows how to use the
type udp jitter
command:
RP/0/0/CPU0:router#
configure
RP/0/0/CPU0:router(config)#
ipsla
RP/0/0/CPU0:router(config-ipsla)#
operation 1
RP/0/0/CPU0:router(config-ipsla-op)#
type udp jitter
RP/0/0/CPU0:router(config-ipsla-udp-jitter)#
Related Commands
Description
Command
Configures an IP SLA operation.
operation, on page 174
Schedules an IP SLA operation.
schedule operation, on page 215
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
OL-24735-01
291
IP Service Level Agreement Commands
type udp jitter