Cisco XR 1200 series Command Reference Manual Download Page 322

Page: 322 / 432

logging archive

To configure attributes for archiving syslogs, use the

logging archive

command in global configuration mode.

To exit the

logging archive

submode, use the

form of this command.

logging archive

no logging archive

Syntax Description

This command has no keywords or arguments.

Command Default

None

Command Modes

Global configuration

Command History

Modification

Release

This command was introduced.

Release 3.2

Usage Guidelines

Use the

logging archive

command to configure attributes for archiving syslogs. This command enters logging

archive configuration mode and allows you to configure the commands in

Table 28: Configuring Command

Attributes For Archiving Syslogs, on page 310

The configuration attributes must be explicitly configured in order to use the logging archive feature.

Note

Table 28: Configuring Command Attributes For Archiving Syslogs

Recommended Setting

Description

Range

Command

4 weeks

Number of weeks

<0-4294967295>

archive-length

20 MB

Size in MB

<1-2047>

archive-size

harddisk

Use configured devices as
the archive device.

device

1 MB

Size in MB

<1-2047>

file-size

daily

frequency

Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1

310

OL-24735-01

Logging Services Commands

logging archive

Summary of Contents for XR 1200 series

















































































































































































































































































































































































































































Search results

Summary of Contents for XR 1200 series

Reviews:

Related manuals for XR 1200 series

Brands by name

Popular brands

Cisco XR 1200 series, Command Reference Manual

Search results

Summary of Contents for XR 1200 series

Reviews:

Related manuals for XR 1200 series

Brands by name

Popular brands