Cisco XR 1200 series Command Reference Manual Download Page 378

Page: 378 / 432

monitor interface

To monitor interface counters in real time, use the

monitor interface

command in EXEC or administration

EXEC mode.

monitor interface

[

type1 interface-path-id1

[...[

type32 interface-path-id32

]]]

Syntax Description

Interface type. For more information, use the question mark (

) online help function.

type

Physical interface or virtual interface.

Use the

show interfaces

command to see a list of all interfaces currently

configured on the router.

Note

For more information about the syntax for the router, use the question mark (

)

online help function.

interface-path-id

Command Default

Use the

monitor interface

command without an argument to display statistics for all interfaces in the system.

Command Modes

EXEC

Administration EXEC

Command History

Modification

Release

This command was introduced.

Release 3.2

Support was added for multiple interfaces.

Support was added for default behavior to monitor all interfaces.

Support was added for wildcards in the interface syntax.

Support was added for additional display options.

Release 3.3.0

Added summary enhancements for the AF aggregates.

Release 3.7.0

Usage Guidelines

Use the

monitor interface

command without any keywords or arguments to display interface counters for

all interfaces. The display refreshes every 2 seconds.

Use the

monitor interface

command with the

type interface-path-id

arguments to display counters for a

single interface. For example:

monitor interface pos0/2/0/0

To display more than one selected interface, enter the

monitor interface

command with multiple

type

interface-path-id

arguments. For example:

monitor interface pos0/2/0/0 pos0/5/0/1 pos0/5/0/2

Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1

366

OL-24735-01

Performance Management Commands

monitor interface

Summary of Contents for XR 1200 series

















































































































































































































































































































































































































































Search results

Summary of Contents for XR 1200 series

Reviews:

Related manuals for XR 1200 series

Brands by name

Popular brands

Cisco XR 1200 series, Command Reference Manual

Search results

Summary of Contents for XR 1200 series

Reviews:

Related manuals for XR 1200 series

Brands by name

Popular brands