Cisco XR 1200 series Command Reference Manual Download Page 97

Page: 97 / 432

event manager refresh-time

To define the time between user authentication refreshes in Embedded Event Manager (EEM), use the

event

manager refresh-time

command in global configuration mode. To restore the system to its default condition,

use the

form of this command.

event manager refresh-time seconds

no event manager refresh-time seconds

Syntax Description

Number of seconds between user authentication refreshes, in seconds. Range is 10
to 4294967295.

seconds

Command Default

The default refresh time is 1800 seconds (30 minutes).

Command Modes

Global configuration

Command History

Modification

Release

This command was introduced.

Release 3.3.0

The

fault manager refresh-time

command was replaced with the

event manager refresh-time

command.

Release 3.6.0

Task ID was changed from fault-mgr to eem.

Release 3.7.0

Usage Guidelines

EEM attempts to contact the AAA server and refresh the username reauthentication whenever the configured

refresh-time

expires.

Task ID

Operations

Task ID

read, write

eem

Examples

This example shows how to set the refresh time:

RP/0/0/CPU0:router(config)#

event manager refresh-time 1900

Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1

OL-24735-01

Embedded Event Manager Commands

event manager refresh-time

Summary of Contents for XR 1200 series

















































































































































































































































































































































































































































Search results

Summary of Contents for XR 1200 series

Reviews:

Related manuals for XR 1200 series

Brands by name

Popular brands

Cisco XR 1200 series, Command Reference Manual

Search results

Summary of Contents for XR 1200 series

Reviews:

Related manuals for XR 1200 series

Brands by name

Popular brands