Cisco XR 1200 series Command Reference Manual Download Page 67

Page: 67 / 432

show logging correlator ruleset

To display defined correlation rule set names, use the

show logging correlator ruleset

command in EXEC

mode.

show logging correlator ruleset

{

all

correlation-ruleset1

...

correlation-ruleset14

} [

detail| summary

]

Syntax Description

Displays all rule set names.

all

Rule set name to be displayed. Up to 14 predefined rule set names can
be specified, separated by a space.

correlation-rule1

...

correlation-rule14

(Optional) Displays detailed information.

detail

(Optional) Displays the summary information.

summary

Command Default

Detail is the default, if nothing is specified.

Command Modes

EXEC

Command History

Modification

Release

This command was introduced.

Release 3.6.0

Usage Guidelines

If the ruletype is not specified, then both stateful and nonstateful rules are displayed as the default.

If the rulesource is not specified, then both user and internally defined rules are displayed as the default.

If the summary or detail options are not specified, then detailed information is displayed as the default.

Task ID

Operations

Task ID

read

logging

Examples

This is the sample output from the

show logging correlator ruleset

command:

RP/0/0/CPU0:router#

show logging correlator RuleSetOne RuleSetTwo

Rule Set Name : RuleSetOne
Rules: Rule1 : Applied

Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1

OL-24735-01

Alarm Management and Logging Correlation Commands

show logging correlator ruleset

Summary of Contents for XR 1200 series

















































































































































































































































































































































































































































Search results

Summary of Contents for XR 1200 series

Reviews:

Related manuals for XR 1200 series

Brands by name

Popular brands

Cisco XR 1200 series, Command Reference Manual

Search results

Summary of Contents for XR 1200 series

Reviews:

Related manuals for XR 1200 series

Brands by name

Popular brands