Cisco XR 1200 series Command Reference Manual Download Page 69

Page: 69 / 432

show logging events buffer

To display messages in the logging events buffer, use the

show logging events buffer

command in EXEC

mode.

show logging events buffer [admin-level-only] [all-in-buffer] [bistate-alarms-set]

[

category name

]

[

context name

] [

event-hi-limit event-id

] [

event-lo-limit event-id

] [

first event-count

] [

group message-group

]

[

last event-count

] [

location node-id

] [

message message-code

] [

severity-hi-limit severity

] [

severity-lo-limit

severity

] [

timestamp-hi-limit hh

ss [month] [day] [year] timestamp-lo-limit hh

ss [month] [day]

[year]

]

Syntax Description

Displays only the events that are at the adminstrative level.

admin-level-only

Displays all event IDs in the events buffer.

all-in-buffer

Displays bi-state alarms in the SET state.

bistate-alarms-set

Displays events from a specified category.

category name

Displays events from a specified context.

context name

Displays events with an event ID equal to or lower than the event ID specified
with the

event-id

argument. Range is 0 to 4294967294.

event-hi-limit event-id

Displays events with an event ID equal to or higher than the event ID specified
with

event-id

argument. Range is 0 to 4294967294.

event-lo-limit event-id

Displays events in the logging events buffer, beginning with the first event.
For the

event-count

argument, enter the number of events to be displayed.

first event-count

Displays events from a specified message group.

group message-group

Displays events, beginning with the last event in the logging events buffer.
For the

event-count

argument, enter the number of events to be displayed.

last event-count

Displays events for the specified location. The

node-id

argument is entered in

the

rack/slot/module

notation.

location node-id

Displays events with the specified message code.

message message-code

Displays events with a severity level equal to or lower than the specified
severity level.

severity-hi-limit

Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1

OL-24735-01

Alarm Management and Logging Correlation Commands

show logging events buffer

Summary of Contents for XR 1200 series

















































































































































































































































































































































































































































Search results

Summary of Contents for XR 1200 series

Reviews:

Related manuals for XR 1200 series

Brands by name

Popular brands

Cisco XR 1200 series, Command Reference Manual

Search results

Summary of Contents for XR 1200 series

Reviews:

Related manuals for XR 1200 series

Brands by name

Popular brands