operation
To configure an IP SLA operation, use the
operation
command in IP SLA configuration mode. To remove
the operation, use the
no
form of this command.
operation operation-number
no operation operation-number
Syntax Description
Operation number. Range is 1 to 2048.
operation-number
Command Default
None
Command Modes
IP SLA configuration
Command History
Modification
Release
This command was introduced.
Release 3.3.0
Usage Guidelines
Task ID
Operations
Task ID
read, write
monitor
Examples
The following example shows how to use the IP SLA
operation
command:
RP/0/0/CPU0:router#
configure
RP/0/0/CPU0:router(config)#
ipsla
RP/0/0/CPU0:router(config-ipsla)#
operation 1
RP/0/0/CPU0:router(config-ipsla-op)#
Related Commands
Description
Command
Schedules an IP SLA operation.
schedule operation, on page 215
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
174
OL-24735-01
IP Service Level Agreement Commands
operation