Cisco XR 1200 series Command Reference Manual Download Page 315

Page: 315 / 432

clear logging

To clear system logging (syslog) messages from the logging buffer, use the

clear logging

command in EXEC

mode.

clear logging

Syntax Description

This command has no keywords or arguments.

Command Default

None

Command Modes

EXEC

Command History

Modification

Release

This command was supported.

Release 3.2

Removed the

internal

keyword.

Release 3.7.0

Usage Guidelines

Use the

clear logging

command to empty the contents of the logging buffer. When the logging buffer becomes

full, new logged messages overwrite old messages.

Use the

logging buffered, on page 312

command to specify the logging buffer as a destination for syslog

messages, set the size of the logging buffer, and limit syslog messages sent to the logging buffer based on
severity.

Use the

show logging, on page 344

command to display syslog messages stored in the logging buffer.

Task ID

Operations

Task ID

execute

logging

Examples

This example shows how to clear the logging buffer:

RP/0/0/CPU0:router#

clear logging

Clear logging buffer [confirm] [y/n] :

Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1

OL-24735-01

303

Logging Services Commands

clear logging

Summary of Contents for XR 1200 series

















































































































































































































































































































































































































































Search results

Summary of Contents for XR 1200 series

Reviews:

Related manuals for XR 1200 series

Brands by name

Popular brands

Cisco XR 1200 series, Command Reference Manual

Search results

Summary of Contents for XR 1200 series

Reviews:

Related manuals for XR 1200 series

Brands by name

Popular brands