Cisco XR 1200 series Command Reference Manual Download Page 216

Page: 216 / 432

recurring

To indicate that the operation starts automatically at the specified time and for the specified duration every
day, use the

recurring

command in IP SLA schedule configuration mode. To not start the operation everyday,

use the

form of this command.

recurring

no recurring

Syntax Description

This command has no keywords or arguments.

Command Default

Recurring is disabled.

Command Modes

IP SLA schedule configuration

Command History

Modification

Release

This command was introduced.

Release 3.3.0

Usage Guidelines

Task ID

Operations

Task ID

read, write

monitor

Examples

The following example shows how to use the

recurring

command:

RP/0/0/CPU0:router#

configure

RP/0/0/CPU0:router(config)#

ipsla

RP/0/0/CPU0:router(config-ipsla)#

schedule operation 1

RP/0/0/CPU0:router(config-ipsla-sched)#

recurring

Related Commands

Description

Command

Configures an IP SLA operation.

operation, on page 174

Schedules an IP SLA operation.

schedule operation, on page 215

Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1

204

OL-24735-01

IP Service Level Agreement Commands

recurring

Summary of Contents for XR 1200 series

















































































































































































































































































































































































































































Search results

Summary of Contents for XR 1200 series

Reviews:

Related manuals for XR 1200 series

Brands by name

Popular brands

Cisco XR 1200 series, Command Reference Manual

Search results

Summary of Contents for XR 1200 series

Reviews:

Related manuals for XR 1200 series

Brands by name

Popular brands