Cisco XR 1200 series Command Reference Manual Download Page 47

Page: 47 / 432

logging suppress apply rule

To apply and activate a logging suppression rule, use the

logging suppress apply rule

command in global

configuration mode. To deactivate a logging suppression rule, use the

form of this command.

logging suppress apply rule rule-name

[

all-of-router

source location node-id

]

no logging suppress apply rule rule-name

[

all-of-router

source location node-id

]

Syntax Description

Name of the logging suppression rule to activate.

rule-name

(Optional) Applies the specified logging suppression rule to alarms originating
from all locations on the router.

all-of-router

(Optional) Applies the specified logging suppression rule to alarms originating
from the specified node. The

node-id

argument is entered in the

rack/slot/module

notation.

source location node-id

Command Default

No logging suppression rules are applied.

Command Modes

Global configuration

Command History

Modification

Release

This command was introduced.

Release 3.8.0

Usage Guidelines

Task ID

Operations

Task ID

read, write

logging

Examples

This example shows how to apply a predefined logging suppression rule to the entire router:

RP/0/0/CPU0:router(config)#

logging suppress apply rule infobistate

RP/0/0/CPU0:router(config-suppr-apply-rule)#

all-of-router

Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1

OL-24735-01

Alarm Management and Logging Correlation Commands

logging suppress apply rule

Summary of Contents for XR 1200 series

















































































































































































































































































































































































































































Search results

Summary of Contents for XR 1200 series

Reviews:

Related manuals for XR 1200 series

Brands by name

Popular brands

Cisco XR 1200 series, Command Reference Manual

Search results

Summary of Contents for XR 1200 series

Reviews:

Related manuals for XR 1200 series

Brands by name

Popular brands