react
To specify an element to be monitored for a reaction, use the
react
command in the appropriate configuration
mode. To remove the specified reaction type, use the
no
form of this command.
react
{
connection-loss
|
jitter-average
[
dest-to-source| source-to-dest
]|
packet-loss
{
dest-to-source|
source-to-dest
}
| rtt| timeout| verify-error
}
no react
{
connection-loss
|
jitter-average
[
dest-to-source| source-to-dest
]|
packet-loss
{
dest-to-source|
source-to-dest
}
| rtt| timeout| verify-error
}
Syntax Description
Specifies that a reaction occurs if there is a connection-loss for the monitored
operation.
connection-loss
Specifies that a reaction occurs if the average round-trip jitter value violates
the upper threshold or lower threshold. The following options are listed for
the
jitter-average
keyword:
•
dest-to-source
—
(Optional) Specifies the jitter average destination to
source (DS).
•
source-to-dest
—
(Optional) Specifies the jitter average source to
destination (SD).
jitter-average
[
dest-to-source
|
source-to-dest
]
Specifies the reaction on packet loss value violation. The following options
are listed for the
packet-loss
keyword:
•
dest-to-source
—
(Optional) Specifies the packet loss destination to source
(DS) violation.
•
source-to-dest
—
(Optional) Specifies the packet loss source to destination
(SD) violation.
packet-loss
{
dest-to-source
|
source-to-dest
}
Specifies that a reaction occurs if the round-trip value violates the upper
threshold or lower threshold.
rtt
Specifies that a reaction occurs if there is a timeout for the monitored operation.
timeout
Specifies that a reaction occurs if there is an error verification violation.
verify-error
Command Default
If there is no default value, no reaction is configured.
Command Modes
IP SLA reaction configuration
IP SLA MPLS LSP monitor reaction configuration
Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1
192
OL-24735-01
IP Service Level Agreement Commands
react
