Cisco XR 1200 series Command Reference Manual Download Page 313

Page: 313 / 432

archive-length

To specify the length of time that logs are maintained in the logging archive, use the

archive-length

command

in logging archive configuration mode. To return to the default, use the

form of this command.

archive-length weeks

no archive-length

Syntax Description

Length of time (in weeks) that logs are maintained in the archive. Range is 0 to
4294967295.

weeks

Command Default

weeks

: 4 weeks

Command Modes

Logging archive configuration

Command History

Modification

Release

This command was introduced.

Release 3.2

Usage Guidelines

Use the

archive-length

command to specify the maximum number of weeks that the archive logs are maintained

in the archive. Any logs older than this number are automatically removed from the archive.

Task ID

Operations

Task ID

read, write

logging

Examples

This example shows how to set the log archival period to 6 weeks:

RP/0/0/CPU0:router(config)#

logging archive

RP/0/0/CPU0:router(config-logging-arch)#

archive-length 6

Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1

OL-24735-01

301

Logging Services Commands

archive-length

Summary of Contents for XR 1200 series

















































































































































































































































































































































































































































Search results

Summary of Contents for XR 1200 series

Reviews:

Related manuals for XR 1200 series

Brands by name

Popular brands

Cisco XR 1200 series, Command Reference Manual

Search results

Summary of Contents for XR 1200 series

Reviews:

Related manuals for XR 1200 series

Brands by name

Popular brands