Cisco XR 1200 series Command Reference Manual Download Page 314

Page: 314 / 432

archive-size

To specify the amount of space allotted for syslogs on a device, use the

archive-size

command in logging

archive configuration mode. To return to the default, use the

form of this command.

archive-size size

no archive-size

Syntax Description

Amount of space (in MB) allotted for syslogs. The range is 0 to 2047.

size

Command Default

size

: 20 MB

Command Modes

Logging archive configuration

Command History

Modification

Release

This command was introduced.

Release 3.2

Usage Guidelines

Use the

archive-length

command to specify the maximum total size of the syslog archives on a storage device.

If the size is exceeded, then the oldest file in the archive is deleted to make space for new logs.

Task ID

Operations

Task ID

read, write

logging

Examples

This example shows how to set the allotted space for syslogs to 50 MB:

RP/0/0/CPU0:router(config)#

logging archive

RP/0/0/CPU0:router(config-logging-arch)#

archive-size 50

Cisco IOS XR System Monitoring Command Reference for the Cisco XR 12000 Series Router, Release 4.1

302

OL-24735-01

Logging Services Commands

archive-size

Summary of Contents for XR 1200 series

















































































































































































































































































































































































































































Search results

Summary of Contents for XR 1200 series

Reviews:

Related manuals for XR 1200 series

Brands by name

Popular brands

Cisco XR 1200 series, Command Reference Manual

Search results

Summary of Contents for XR 1200 series

Reviews:

Related manuals for XR 1200 series

Brands by name

Popular brands