B&R ACOPOSinverter P84, User Manual

Page: 331 / 405

Programming guidelines
ACOPOSinverter P84 User's Manual 2.10 331
PROTECTION
VISIBILITY
<< >>
PARAMETERS
MENUS
RDY
Term +0.00 Hz 0 A
VISIBILITY
Quick Code
Active
All
RDY
Term +0.00 Hz 0 A
PARAMETERS
Quick
1.1 SIMPLE START MENU
1.2 MONITORING
1.3 SETTINGS
1.4 DRIVE DATA
1.5 INPUTS/OUTPUTS
1. DRIVE MENU
Quick
MENUS
PROTECTION CHANNEL
PROTECTED PARAMETERS
<< >>
RDY
Term +0.00 Hz 0 A
PROTECTION
Quick Code
HMI
POWERSUITE
MODBUS
CANopen
COM. CARD
<< >>
RDY
Term +0.00 Hz 0 A
PROTECTION CHANNEL
Quick Code
1.1 SIMPLE START MENU
1.2 MONITORING
1.4 DRIVE DATA
1.5 INPUTS/OUTPUTS
1.3 SETTINGS
<< >>
1 DRIVE MENU
Quick Code
PROTECTED PARAMETERS
Ramp increment
Acceleration
Deceleration
Acceleration 2
Deceleration 2
1.3 SETTINGS
All
PROTECTED PARAMETERS
CONFIG. SETPOINTS
RAMP
STOP CONFIGURATION
AUTO DC INJECTION
JOG
1.7 APPLICATION FUNCT.
PROTECTED PARAMETERS
JOG
Jog ref
Jog pause
JOG
PROTECTED PARAMETERS
ENT
ENT
ENT
Select display of all
parameters or only the
active parameter.
Press ESC to end this screen.
The next steps must be
completed exclusively in the
[1. DRIVE MENU].
By default, all menus are marked.
By pressing ENT the selection
is canceled.
By pressing again on ENT, a
menu is again selected.
IMPORTANT: The protected channels must be chosen,
since a parameter that is protected on a chosen channel
remains accessible on the unselected channels.
PROG. CARD
ENT
ENT
1.7 APPLICATION FUNCT.
On these screens all parameters of the
menu
can be protected and displayed for
selection, with the exception of the
parameters belonging to expert mode.
By pressing the button "All", all
parameters are selected. Pressing again
on the “All” button cancels the selection
of all parameters.
If no parameters are shown, then in this screen
no parameter selection is possible.
ENT
ENT
RDY
Term +0.00 Hz
0 A
7.3 ACCESS PARAMETERS
Quick Code
[1. DRIVE MENU]
Note:
The protected parameters are no longer accessible and are not, therefore, displayed for the selected
channels.