B&R ACOPOSinverter P84, User Manual

Page: 262 / 405

Programming guidelines
262 ACOPOSinverter P84 User's Manual 2.10
[Line cont assign] (LLC-)
Code Name/Description Setting range Factory settings
LLC- [Input contactor assign]
LLC [Input contactor assign] [No] (nO)
Logic output or control relay
nO [No] (nO) : Function not assigned (in this case, none of the function parameters can be accessed)
r2
[CONFIGURATION R2]
(r2)
dO1 [DO1] (dO1) : Analog output AO, which can be used as logic output. The parameter is accessible when [CONFIGURATION AO1] (AO1) = [No]
(nO) .
LES [Lock] [No] (nO)
nO [No] (nO) : Function not active
LI1 [LI1] (LI1)
- .
- .
-
.
[...] (...) : See the assignment conditions
The inverter locks when the assigned input or bit changes to 0.
LCt [Mains V. time out] 5 to 999 s 5 s
Monitoring time for closing of line contactor. If there is no voltage in the power circuit of the inverter after this time, this is locked with the fault
[Assign line cont] (LCF) .