B&R ACOPOSinverter P84, User Manual

Page: 160 / 405

Programming guidelines
160 ACOPOSinverter P84 User's Manual 2.10
2.8.8.5.5 Setting recommendations to avoid error messages of the type [overspeed] (SOF)
ENA system authorizes overspeeds that can trip a fault [overspeed] (SOF) . To avoid this, it is recommended that
the value of the following parameters be increased slightly:
• [Max. output freq.] (tFr) , see "Drive parameters (tFr - PHr)" on page 152 .
Code Name/Description Setting range Factory settings
EnA [ENA system] [No] (nO)
The parameter is accessible when [Motor control type] (Ctt) = [SVC U] (UUC) .
nO [No] (nO) : Function not active.
YES [Yes] (YES) : Function active.
GPE [P component ENA]
1)
1 to 9999 250
Parameter can be enabled if [ENA System] (EnA) = [Yes] (YES) .
GIE [I component ENA]
1)
0 to 9999 100
Parameter can be enabled if [ENA System] (EnA) = [Yes] (YES) .
rAP [Translation]
1)
10 to 999.9 10
Parameter can be enabled if [ENA System] (EnA) = [Yes] (YES) .
1) This parameter can also be accessed via the [SETTINGS] (SEt-) menu.
Parameter that can be modified during operation or when stopped.