B&R ACOPOSinverter P84, User Manual

Page: 300 / 405

Programming guidelines
300 ACOPOSinverter P84 User's Manual 2.10
The parameter is accessible in the [expert] mode.
[Fault inhibit assign.] (InH-)
Code Name/Description Factory settings
InH- [Fault inhibit assign.]
InH [Fault inhibit assign.] [No] (nO)
Hold the "ENT" button for two seconds for the assignment of the fault inhibition.
Caution!
RISK OF DAMAGE TO THE SYSTEM
The inverter is not protected when faults are inhibited. This invalidates the warranty. Check that the possible consequences do
not present any risk.
Failure to observe these instructions can result in damage to property.
nO [No] (nO) : Function not active.
LI1 [LI1] (LI1)
InH .
[...] (...) : See the assignment conditions
If the assigned input or bit is at 0, fault monitoring is active.
If the assigned input or bit is at 1, fault monitoring is inactive.
Active faults are reset on a rising edge (change from 0 to 1) of the assigned input or bit.
Note:
The "power removal" function is not affected by this function, and neither are the faults that would lead to a complete breakdown.
A list of faults affected by this function
see "Fault - Causes - Measures" on page 335 .