B&R ACOPOSinverter P84, User Manual

Page: 380 / 405

Accessories
380 ACOPOSinverter P84 User's Manual 2.10
Model number 8I0FT092.300-1 8I0FT180.300-1
General information
Certification
CE Yes
KC Yes
Mains connection
Max. nominal voltage 3x 480 VAC +10%
Nominal filter current 92 A 180 A
Max. fault current
At 200 to 240 VAC - 80 mA
At 380 to 480 VAC 60 mA 140 mA
Power loss
At 200 to 240 VAC - 58 W
At 380 to 480 VAC 30 W 58 W
Operating conditions
Installation at elevations above sea level 0 to 1000 m
EN 60529 protection IP21 and IP41 on upper part
Max. relative humidity in accordance with IEC
60068-2-3
93%, non-condensing
No dripping water
Ambient temperature -10 to 50°C
Maximum installation elevation 3000 m
1)
Environmental conditions
Temperature
Storage -40 to 65°C
Mechanical characteristics
Weight 17.0 kg 40.0 kg
Installation Below or next to the inverter
General information
Conformity to standard EN 133200
Table 31: 8I0FT092.300-1, 8I0FT180.300-1 - Technical data
1) From 1000 to 3000 m, current reduced by 1% per 100 m, limited to 2000 m for a grounded phase distribution network.
Properties
• Additional EMC filters are intended to reduce conducted interference emissions from the mains supply to
a level under the limits specified in IEC/EN 61800-3, category C1, C2 or C3 in environment 1 (public power
system) or 2 (industrial power system) depending on the inverter power.
• The data for determining the permissible length of the shielded motor cable is listed in the technical data
for ACOPOSinverter P84 devices under "Line-conducted and radiated emissions".
•
Additional EMC filters can only be used for TN (neutral) and TT (neutral-ground) connection types.