B&R ACOPOSinverter P84, User Manual

Page: 323 / 405

Programming guidelines
ACOPOSinverter P84 User's Manual 2.10 323
Parameter overview access code
Code Name/Description Setting range Factory settings
CSt [State] [enabled] (ULC)
Information parameter, cannot be modified.
LC
[locked]
(LC) : The inverter is locked by an access code.
ULC [enabled] (LC) : The inverter is not locked by an access code.
COd
[PASSWORD]
OFF to 9999
[Off]
(OFF)
1st access code. The value [Off] (OFF) indicates that no access code has been set to [enabled]. The value [On] (On) indicates that the inverter
is protected and an access code must be entered to enable it. Once the correct code has been entered, it remains on the display and the inverter
is unlocked until the next time the power supply is disconnected.
• PIN code 1 is a public unlock code: 6969.
COd2 [PIN code 2] OFF to 9999 [Off] (OFF)
Parameter can only be activated in [expert] mode.
2nd access code. The value [Off] (OFF) indicates that no access code has been set to [enabled] . The value [On] (On) indicates that the inverter
is protected and an access code must be entered to enable it. Once the correct code has been entered, it remains on the display and the inverter
is unlocked until the next time the power supply is disconnected.
•
PIN code 2 is an unlock code known only to B&R Product Support.
If [access code PIN 2] (COd2) is not set to "off", only the menu [MONITORING] (SUP-) is displayed.
If [access code PIN 2] (COd2) is set to "off" (inverter enabled), all the menus are displayed.
If the display settings in the menu [DISPLAY CONFIG.] are changed and [access code PIN 2] (COd2) is not set to "off", the configured display
is retained.
If [access code PIN 2] (COd2) is set to "off" (inverter enabled), the display [DISPLAY CONFIG.] configured in the menu is retained.
ULr [Upload rights] [allowed] (ULr0)
Read or copy the current configuration in the inverter.
ULr0 [allowed] (ULr0) : The configuration currently used in the inverter may be loaded into the graphic display terminal at any time.
ULr1 [not allowed] (ULr1) : The configuration currently used in the inverter may only be loaded in the graphic display terminal if the inverter is not
protected by an access code or if the correct code is entered.
dLr [Download rights] [FU unlocked] (dLr1)
Writes the current configuration to the inverter or downloads a configuration to the inverter
dLr0 [FU locked] (dLr0) : A configuration file can only be downloaded to the inverter if the inverter is protected by an access code, which is the same
as the access code for the configuration to be downloaded.
dLr1 [FU unlocked] (dLr1) : A configuration file can be downloaded to the inverter or a configuration in the inverter can be modified if the inverter is
unlocked (access code entered) or is not protected by an access code.
dLr2 [not allowed] (dLr2) : Download not allowed.
dLr3
[FU locked/unlocked]
(dLr3) : Combination of
[FU locked]
(dLr0) and
[FU unlocked]
(dLr1) .