B&R ACOPOSinverter P84, User Manual

Page: 195 / 405

Programming guidelines
ACOPOSinverter P84 User's Manual 2.10 195
As the graphic display terminal may be selected as the command and/or reference channel, its action modes can
be configured.
The parameters on this page can only be accessed on the graphic display terminal, and not on the integrated
display terminal.
Information:
•
The command and/or the reference of the operator terminal is only active when the command
and/or reference channels are also active via the terminal, with the exception of [T/K] (command
via the operator terminal), which has priority on these channels. By pressing the key [T/K] (com-
mand via the operator terminal), the control is transferred back to the selected channel again.
•
Command and reference via the display terminal are impossible if the latter is connected to
more than one inverter.
•
The functions JOG, preset frequencies and ± speed are only accessible if [Profile] (CHCF) is
set to [together] (SIM) .
•
The functions for the predefined PID reference are only accessible if [Profile] (CHCF) is set to
[together] (SIM), or [separated] (SEP)
•
The function [T/K] (command via the operator terminal) is accessible, regardless of the setting
in the [Profile] (CHCF) .
Name/Description Factory settings
[F1 key assignment] [No]
[No] : Not active
[Jog] : JOG step mode
[Prefix v2]
: By pressing a button, the inverter is preset with the second frequency
[2nd preset frequency]
(SP2) . Press STOP to stop the frequency inverter.
[Prefix v3] : By pressing a button, the inverter is preset with the third frequency [3rd preset frequency] (SP3) . Press STOP to stop the frequency inverter.
[Ref PID 2] : Provides a PID reference that is equal to the second pre-selected reference of the PID [2nd preset PID ref.] (rP2) without a run command. Only
executable if
[channel ref.1]
(Fr1) =
[HMI]
(LCC) . Not functional with
[T/K]
.
[Ref PID3] : Provides a PID reference that is equal to the third pre-selected reference of the PID [3rd preset PID ref.] (rP3) without a run command. Only exe-
cutable if [channel ref.1] (Fr1) = [HMI] (LCC) . Not functional with [T/K] .
[+ speed]
: + speed; only executable if
[channel ref.2]
(Fr2) =
[HMI]
(LCC) . Press the key to control the inverter and increase the speed. Press STOP to stop
the frequency inverter.
[- speed] : - speed; only executable if [channel ref2] (Fr2) = [HMI] (LCC) and if [+ speed] is assigned to another key. Press the key to control the inverter and
decrease the speed. Press STOP to stop the frequency inverter.
[T/K] : Command via the terminal, takes priority over [Cmd switching] (CCS) and [Ref. 2 switching] (rFC) .
[F2 key assignment] [No]
Identical to [F1 key assign] .
[F3 key assignment] [No]
Identical to [F1 key assign] .
[F4 key assignment] [No]
Identical to [F1 key assign] .
[HMI cmd.] [Stop]
If the function [T/K] is associated with a key and is active, this parameter defines the behavior for the point in time at which the graphic display terminal or the
external operator terminal takes back the control.
[Stop] : Stops the inverter (although the controlled direction of operation and reference of the previous channel are copied (to be taken into account on the next
RUN command)).
[Copy done]
: Does not stop the inverter (the controlled direction of operation and the reference of the previous channel are copied).