B&R ACOPOSinverter P84, User Manual

Page: 390 / 405

Accessories
390 ACOPOSinverter P84 User's Manual 2.10
4.7 Fans
Danger!
HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH
•
Only appropriately trained persons who are familiar with and understand the contents of this
manual and all other pertinent product documentation and who have received safety training
to recognize and avoid hazards involved are authorized to work on and with this drive system.
Installation, adjustment, repair and maintenance must be performed by qualified personnel.
•
The system integrator is responsible for compliance with all local and national electrical code
requirements as well as all other applicable regulations with respect to grounding of all equip-
ment.
•
Many components of the product, including the printed circuit boards, operate with mains volt-
age. Do not touch. Use only electrically insulated tools.
•
Do not touch unshielded components or terminals with voltage present.
•
Motors can generate voltage when the shaft is rotated. Before performing any type of work on
the drive system, block the motor shaft to prevent rotation.
•
AC voltage can couple voltage to unused conductors in the motor cable. Insulate both ends of
unused conductors of the motor cable.
•
Do not short across the DC bus terminals or the DC bus capacitors or the braking resistor
terminals.
•
Before performing work on the drive system:
°
Disconnect all power, including external control power that may be present.
°
Place a "Do Not Turn On" label on all power switches.
°
Lock all power switches in the open position.
°
Wait 15 minutes to allow the DC bus capacitors to discharge. The DC bus LED is not an
indicator of the absence of DC bus voltage that can exceed 800 VDC.
°
Measure the voltage on the DC bus between the DC bus terminals using a properly rated
voltmeter to verify that the voltage is <42 VDC.
°
If the DC bus capacitors do not discharge properly, contact your local B&R represen-
tative.
•
Install and close all covers before applying voltage.
Failure to follow these instructions will result in death or serious injury.
4.7.1 Fans
Model number Short description Figure
ACOPOSinverter P84 - Fan
8I0XF084.020-1 Fan for ACOPOSinverter 3x 200 to 240 V, 0.37 to 1.5 kW and
3x 380 to 480 V, 0.75 to 2.2 kW
8I0XF084.030-1 Fan for ACOPOSinverter P84 3x 200 to 240 V, 2.2 to 4 kW and
3x 380 to 480 V, 3 to 4 kW
8I0XF084.040-1 Fan for ACOPOSinverter P84 3x 200 to 240 V, 5.5 kW and 3x
380 to 480 V, 5.5 to 7.5 kW
8I0XF084.050-1 Fan for ACOPOSinverter P84 3x 200 to 240 V, 7.5 kW and 3x
380 to 480 V, 11 kW
8I0XF084.055-1 Fan for ACOPOSinverter P84 3x 200 to 240 V, 11 to 15 kW and
3x 380 to 480 V, 15 to 18.5 kW
8I0XF084.060-1 Fan for ACOPOSinverter P84 3x 200 to 240 V, 18.5 to 22 kW
and 3x 380 to 480 V, 22 kW
8I0XF084.070-1 Fan for ACOPOSinverter P84 3x 380 to 480 V, 30 to 37 kW
8I0XF084.075-1 Fan for ACOPOSinverter P84 3x 200 to 240 V, 30 to 45 kW
8I0XF084.080-1 Fan for ACOPOSinverter P84 3x 380 to 480 V, 45 to 75 kW
Table 33: 8I0XF084.020-1, 8I0XF084.030-1, 8I0XF084.040-1, 8I0XF084.050-1, 8I0XF084.055-1,
8I0XF084.060-1, 8I0XF084.070-1, 8I0XF084.075-1, 8I0XF084.080-1 - Order data