B&R ACOPOSinverter P84, User Manual

Page: 192 / 405

Programming guidelines
192 ACOPOSinverter P84 User's Manual 2.10
2.8.10.9 Assignment conditions for the logic inputs and control bits
The following elements are available for every command or function that can be assigned to a logic input or a
control bit:
Logic input / control bit Description
[LI1] (LI1) - [LI6] (LI6) Drive with or without option
[C101] (C101) - [C110] (C110) Not applicable
[C111] (C111) - [C115] (C115) Not applicable
[C201] (C201) - [C210] (C210) With built-in communication interface in the configuration [profile I/O] (IO)
[C211] (C211) - [C215] (C215) With integrated communication interface, regardless of configuration
[C301] (C301) - [C310] (C310) With communication card in the configuration [profile I/O] (IO)
[C311] (C311) - [C315] (C315) With a communication card regardless of profile
[CD00] (Cd00) - [CD10] (Cd10) In the configuration [profile I/O] (IO)
[CD11] (Cd11) - [CD15] (Cd15) Regardless of configuration
Note:
In the configuration [profile I/O] (IO) there is no access to LI1 and if [2/3 wire control] (tCC) , see "Input
and output parameters (tCC - rr5)" on page 166 = [3wire control] (3C) there is also no access to LI2 ,
C201 and C301 .
Warning!
ACCIDENTAL OPERATION OF DEVICE
Inactive command channels are not monitored (no fault triggering due to a failure of the communication
bus). Make absolutely sure that the commands and functions assigned to bits C101 to C315 will not
pose a risk in the event of a failure of the associated communication bus.
Failure to follow these instructions will result in death or serious injury.