B&R ACOPOSinverter P84, User Manual

Page: 273 / 405

Programming guidelines
ACOPOSinverter P84 User's Manual 2.10 273
2.8.11.25 Menu and parameters that can be switched in multimotor mode
• [SETTINGS] (SEt-)
•
[DRIVE DATA] (drC-)
• [INPUTS/ OUTPUTS] (I-O-)
• [CONTROL] (CtL-)
•
[APPLICATIONS-FCT.] (FUn-) with the exception of the function [MULTIMOTOR CONFIG]
(only configure once)
• [FAULT MANAGEMENT] (FLt)
• [USER MENU]
• [USER CONF.] : The name of the configuration specified by the user in the menu [FACTORY SETTING]
(FCS-)
2.8.11.26 Menu and parameters that can be switched in multiconfiguration mode
As in multimotor mode, except for the motor parameters that are common to the three configurations:
• Nominal current
• Thermal current
•
Nominal voltage
• Rated frequency
• Nominal speed
•
Nominal power
• IR compensation
•
Slip compensation
• Type of thermal protection
• Thermal state
•
The autotuning parameters and motor parameters that can be accessed in expert mode
• Type of motor control
Note:
No other menus or parameters can be switched.