B&R ACOPOSinverter P84, User Manual

Page: 326 / 405

Programming guidelines
326 ACOPOSinverter P84 User's Manual 2.10
[Display value type]
Name/Description
[Display value type]
[Dig display] : Display of one or two digital values on the screen (factory configuration).
[Bar disp] : Display of one or two bar graphs on the screen.
[List] : Display of a list of one to five values on the screen.
[PARAMETER SELECTION]
[Alarm groups]
[Frequency ref.]
[Ref. Torq.]
[Output frequency]
[I motor]
Mean Speed ENA]
[Speed]
[Motor voltage]
[Motor power]
[Motor torque]
[Mains voltage]
[Drv.thermal state]
[Drv.thermal state]
[Th. brake val. state]
[Consumption]
[Run time]
[Elapsed time]
[IGBT alarm counter]
[PID speed ref.]
[PID feedback]
[PID error]
[PID Output]
[Config. active]
[act. parameter set]
Can only be activated if [Display type] = [List]
In Hz: Parameter displayed in the factory settings.
As %
In Hz
In A
In Hz
In rpm
In V
In W
As %
In V
As %
As %
As %
In watt hours (Wh) or kilowatt hours (kWh) according to the inverter type
In hours (motor duty cycle)
In hours (motor duty cycle)
In seconds (accumulated time of the overtemperature alarms)
As %
As %
As %
In Hz
CNFO, 1 or 2, can only be activated if [Display type] = [List]
SET1, 2 or 3, can only be activated if [Display type] = [List]
Parameters are selected using ENT (a tick then appears next to the parameter) or deselected.
SELECTED PARAMETERS
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
MONITORING
Examples:
RUN Term +35.00Hz 80A
Quick
MONITORING
Frequency reference:
Motor current:
Motor speed:
Therm. Motor state:
Therm. FU state:
50.1Hz
80 A
1250 rpm
80%
80%
Display of 2 digital values
Values
Display of 2 digital values
Bar charts
Display of a list of
5 values
RUN Term +35.00Hz 80A
1250 rpm
Motor current
80 A
Quick
Motor speed
RUN Term +35.00Hz 80A
1250 rpm
Motor current
80 A
Quick
RUN Term +35.00Hz 80A
1250 rpm
Motor current
80 A
Quick
Motor speed Motor speed
Min
0
max
1500
Min
0
max
150
Motor speed