Installation guide
44
ACOPOSinverter P84 User's Manual 2.10
Model number
8I84T203000.01P-1
8I84T203700.01P-1
8I84T204500.01P-1
Electrical isolation
Output - ACOPOSinverter
Yes
Output - Output
No
Analog outputs
Quantity
1
Output
0 to 10 V or 0 to 20 mA
7)
Electrical isolation
Output - ACOPOSinverter
Yes
Output - Output
No
Max. load impedance
Voltage
470 Ω
Current
500 Ω
Update time
<2 ms ±0.5 ms
Resolution
10-bit
Operating conditions
Installation at elevations above sea level
0 to 1000 m
Degree of protection per EN 60529
Upper part: IP21 and IP41
Lower part: IP54 (heat sink)
Ambient temperature
-10 to 50°C
Max. ambient temperature
Up to 60°C
Relative humidity per IEC 60068-2-3
5 to 95%, non-condensing
No dripping water
Maximum installation elevation
Up to 3000 m
8)
Max. pollution degree per IEC/EN 61800-5-1
2 (non-conductive pollution)
Environmental conditions per IEC 60721-3-3
Class 3C1 and 3S2
Operating position
Vertical mounting orientation ±10%
Environmental conditions
Temperature
Storage
-25 to 70°C
Vibration
Operation
3 to 13 Hz: 1.5 mm amplitude / 13 to 200 Hz: 1 g
Shock
Operation
15 g, 11 ms
Mechanical characteristics
Dimensions
Width
320 mm
Height
550 mm
Depth
266 mm
Weight
37 kg
Table 14: 8I84T203000.01P-1, 8I84T203700.01P-1, 8I84T204500.01P-1 - Technical data
1)
Shield plate included in delivery
2)
For shielded motor cables
≤50 m → At a clock frequency of 2 to 2.5 kHz
≤25 m → At a clock frequency of 2.6 to 12 kHz
3)
For shielded motor cables
≤100 m → At a clock frequency of 2 to 2.5 kHz
≤50 m → At a clock frequency of 2.6 to 12 kHz
4)
These values are valid for the rated clock frequency.
5)
The min. resistance value is specified at a temperature of 20°C.
6)
1 logic input, configurable as a logic input or PTC sensor input using a switch. Input for max. 6 PTC sensors in series: Nominal value <1.5 kΩ, 3 kΩ trigger
resistance, 1.8 kΩ reset value, short-circuit proof <50 Ω
7)
The analog output is configurable as a logic output.
8)
From 1000 to 3000 m, current reduced by 1% per 100 m
Summary of Contents for ACOPOSinverter P84
