B&R ACOPOSinverter P84, User Manual

Page: 298 / 405

Programming guidelines
298 ACOPOSinverter P84 User's Manual 2.10
[UNDERVOLTAGE MGT.] (USb-)
Code Name/Description Setting range Factory settings
USb- [UnderV. fault mgt]
USb [Undervoltage] [Flt&R1 open] (0)
Behavior of the inverter in the event of an undervoltage
0 [Flt&R1 open] (0) : Fault and fault relay open.
1
[Flt&R1close]
(1) : Alarm and fault relay closed.
2 [Alarm] (2) : Alarm and fault relay remains closed. The alarm can be assigned to a logic output or a relay.
UrES [Mains voltage] Depending on the
inverter voltage
Depending on the
inverter voltage
Rated voltage of the line supply in V.
For 8I84T2*****.01P-1:
200 [200VAC] (200) : 200 volts AC
220
[220VAC]
(220) : 220 volts AC
240 [240VAC] (240) : 240 volts AC
260 [260VAC] (260) : 260 volts AC (factory setting)
For 8I84T4*****.01P-1:
380
[380VAC]
(380) : 380 volts AC
400 [400VAC] (400) : 400 volts AC
440 [440VAC] (440) : 440 volts AC
460 [460VAC] (460) : 460 volts AC
480 [480VAC] (480) : 480 volts AC (factory setting)
USL [Undervoltage level]
Undervoltage fault trip level in V. The adjustment range and the factory setting are dependent on the rated voltage of the inverter as well as the
value of the [mains voltage] (UrES) .
USt [Undervolt. time out] 0.2 to 999.9 s 0.2 s
Time delay for taking undervoltage fault into consideration
StP
[UnderV. prevention] [No]
(nO)
Behavior on reaching the switching point for undervoltage.
nO [No] (nO) : No action.
MMS [SupplDC Bus] (MMS) : This stop mode uses the inertia to maintain the DC bus voltage as long as possible.
rMP [StopRamp] (rMP) : Stop according to a configurable ramp [max. stop time] (StM) .
LnF [Lock.] (LnF) : Locking (freewheel stop) without faults.