B&R ACOPOSinverter P84, User Manual

Page: 187 / 405

Programming guidelines
ACOPOSinverter P84 User's Manual 2.10 187
2.8.10.5 Reference channel design 2
Reference channel for the configurations [together] (SIM) , [separate] (SEP) , [Profile I/O] (IO)
[Ref 1B switching]
[Channelref1]
[Channelref1B]
FRA
[Summing ref. 2]
[Summing ref. 3]
[Subtract ref. 2]
[Subtract ref. 3]
FR
A
+
SA
2
+
SA
3
- d
A2
-
dA
3
A B
PID
[Ref.2 channel]
Channel 1
Channel 2
[Ref channel switching 2]
Forced local
nO
LI
[High
frequency]
[Small
frequency]
HSP
LSP
FrH
Ramps (1)
ACC DEC
AC2, DE2
rFr
Graphic display terminal
0 V
nO
Al1
Al2
LCC
1) Ramps not active if the PID function is active in automatic mode.
Legend:
Parameters: The black rectangle corresponds to the factory setting.
Information:
The operation "Forced local" is not active in the [Profile I/O] mode.
Statements
Fr1, Fr1b for SEP and IO ::
• Terminals, graphic display terminal, integrated communication interface, communication card
Fr1b for SIM :
• Terminals, only available if Fr1 = Terminals
SA2 , SA3 , dA2 , dA3 :
• Terminals only
Fr2 :
• Terminals, graphic display terminal, integrated communication interface, communication card and +/-speed
Note:
[Channel1B act] (Fr1b) and [Ref switch 1B] (rCb) must be configured in the [APPLICATIONS-FCT.]
(Fun-) menu.