Ambu aScope 4 Broncho Large, Instructions For Use Manual

Page: 15 / 340

EN
15
Absent or
reduced suction or
sampling capability
or difficulty in
inserting endoscopic
accessory through
the working channel.
Working channel
blocked. Clean the working channel using a
cleaning brush or flush the working
channel with sterile saline using a
syringe. Do not operate the suction
button when instilling fluids.
Suction pump is
not turned on or
not connected. Turn the pump on and check the suction
line connection.
Suction button
is damaged. Prepare a new endoscope.
Endoscopic accessory
inserted in working
channel
(applicable
if suction is absent
or reduced).
Remove endoscopic accessory.
Check that the accessory used
is of the recommended size.
Bending section not in
neutral position. Move bending section into
neutral position.
Soft endoscopic
accessory difficult to
pass through working
channel port. Use one of the enclosed introducers.
No sample container is
attached, or poor
connection of
sample container. Connect or re-connect sample container
to the sampler bridge.
Sampler bridge may
not be connected
properly to the
aScope 4 Broncho. Re-connect the sampler bridge to aScope
4 Broncho, and press the attachment lock
button to secure connection.
Vacuum suction
tubing is not connected
properly to suction
connector, or to
suction adapter. Ensure that the parts are properly
connected. If suction is still absent or
reduced change to another vacuum
suction tubing.