Ambu aScope 4 Broncho Large, Instructions For Use Manual

Page: 9 / 340

EN
9
11 Endoscope cable Transmits the image signal to the displaying unit.
12 Protection pipe Protects the insertion cord during transport and storage.
Remove before use.
13 Handle protection Protects the suction connector during transport and
storage. Remove before use.
14 Introducer To facilitate introduction of Luer Lock syringes and soft
endoscopic accessories through the working channel.
Item Function
B Sample container Connects to the sampler bridge and holds the
retrieved sample.
No. Part Function
15 Flip top
Acts as click-on locking mechanism for sample
container. To be pressed down anteriorly to disengage
locking mechanism.
16 Sample container lid For closing and protecting the sample.
17 Connection interface For connection of sampler bridge and sample container.
18 Sample container glass For storage of sample.
Item Function
C Suction adapter For connection to a male suction adapter
and the suction connector.
No. Part Function
19 Suction adapter
For connection to a male suction adapter
and the suction connector.
Item Function
D Sampler bridge Connects to the aScope 4 Broncho, and creates a
closed loop for sampling and/or suctioning.
No. Part Function
20 Suction connector For connection of suction tubing.
21
aScope 4 Broncho
connection interface For introduction of aScope 4 Broncho suction
connector, to establish connection.
22 Attachment lock Locks the sampler bridge to the aScope 4 Broncho.
23 Flow switch
Determines suction flow direction and switches
between general suction and sampling.
24 Connection interface For connection of sampler bridge and sample container.
3. Explanation of symbols used
Symbols for the aScope 4
Broncho Sampler Set Indication
Working length of the insertion cord.
Max OD
Maximum insertion portion width
(Maximum outer diameter).
Min ID
Minimum working channel width
(Minimum inner diameter).