Agilent Technologies E5070B, User Manual

Page: 90 / 769

84 Chapter 3
Setting Measurement Conditions
Selecting a Data Format
Selecting a data format
Use the following procedure to select a data format.
Step 1. Press (or ) and (or ) to select the trace for
which the data format will be set.
Step 2. Press .
Step 3. Press the softkey that corresponds to the desired data format.
Softkey Function
Log Mag
Selects the log magnitude format
Phase
Selects the phase format
Group Delay
Selects the group delay format
Smith
-
Lin / Phase
Selects the Smith chart format (with linear magnitude and phase as the
marker response values)
Smith
-
Log / Phase
Selects the Smith chart format (with log magnitude and phase as the
marker response values)
Smith
-
Real / Imag
Selects the Smith chart format (with the real and imaginary parts as the
marker response values)
Smith
-
R + jX
Selects the Smith chart format (with resistance and reactance as the
marker response values)
Smith
-
G + jB
Selects the Smith chart format (with conductance and susceptance as
the marker response values)
Polar
-
Lin / Phase
Selects the polar format (with linear magnitude and phase as the marker
response values)
Polar
-
Log / Phase
Selects the polar format (with log magnitude and phase as the marker
response values)
Polar
-
Real / Imag
Selects the polar format (with the real and imaginary parts as the marker
response values)
Lin Mag
Selects the linear magnitude format
SWR
Selects the SWR (standing wave ratio) format
Real
Selects the real format
Imaginary
Selects the imaginary format
Expand Phase
Selects the expanded phase format
Positive Phase
Selects the positive phase format