![Agilent Technologies E5070B User Manual Download Page 512](http://html.mh-extra.com/html/agilent-technologies/e5070b/e5070b_user-manual_2868065512.webp)
506
Chapter 15
Measurement Examples
Measuring the Deviation from a Linear Phase
2. Define the Measurement Conditions
The measurement conditions are defined by following the steps described below.
Setup Description
Key Operation
Presetting
-
OK
Center frequency: 1.09 GHz
Frequency span: 20 MHz
Measurement parameter: S
21
-
S21
Data format: Expand Phase
-
Expand Phase
Executing the Auto Scale
-
Auto Scale
3. Execute the Calibration
The THRU response calibration is executed.
Setup Description
Key Operation
Executing the THRU response
(A THRU standard is connected instead of a
DUT)
-
Calibrate
-
Response (Thru)
-
Thru
-
Done
4. Connect the DUT and Execute the Auto Scale
The DUT is connected again as shown in Figure 15-21 to execute the auto scale.
Setup Description
Key Operation
Executing the auto scale
-
Auto Scale
Summary of Contents for E5070B
