Agilent Technologies E5070B, User Manual

Page: 606 / 769

600 Appendix A
Manual Changes
Manual Changes
o Function to have the multiport test set E5091A-016 correspond to this instrument.
o Function to select the 85052C as the calibration kit.
o Function to specify up to eight calibration standards for each calibration class.
o Reading/Writing files of the calibration standard.
o Function to set the number of measurement points to a maximum of 20001.
*1
Change 9
The equipment with prefix MY423 or earlier does not support the USB (USBTMC)
interface port nor the removable hard disk function. Please refer to the following
specifications for the rear view and the side view.
Figure A-15 Dimensions (rear view, with Option 1E5, in millimeters, nominal)
*1.This function is available when the channel/trace is set to Ch 1 / Tr 4 20001 Points.