Agilent Technologies E5070B, User Manual

Page: 218 / 769

212 Chapter 4
Calibration
Power Calibration
frequency is used.
Hardkey Function
If you select a cell and then press this key, you enter the mode that
allows you to edit the cell character by character. If you change a
value and then press this key, the value is entered in the cell.
Moves up or down in the cell selected in the table. In the
character-by-character edit mode, you can select an item or perform
a stepped change of data.
Moves right or left in the cell selected in the table.
...
Enters a value in the cell.
Softkey Function
Delete
Deletes the line in which the selected cell is included.
Add
Adds a new line above the line in which the selected cell is included.
Clear Cal Factor Table
-
OK
Resets the table.
NOTE When setting the table by using the front panel keys or the keyboard, you need to first set
the focus on (select) the operation target (table or softkey). You can change the focus by
pressing
in the ENTRY block. When the focus is placed on the table, the window
frame of the table is displayed as bright as the window frame of the active channel. When
the focus is placed on the softkey menu, the softkey menu title area is displayed in blue.