Agilent Technologies E5070B, User Manual

Page: 448 / 769

442 Chapter 13
Setting and Using the Control and Management Functions
Accessing Hard Disk of E5070B/E5071B from External PC
Step 6. The New Share dialog box (Figure 13-21) appears. Enter the share name (name used when
accessed from the external PC) in the
Share Name
box (1 in Figure 13-21) and click the
OK
button (2 in Figure 13-21).
Figure 13-21 New Share dialog box
Step 7. In the USERS(D:) Properties dialog box, click the
OK
button (2 in Figure 13-20).
Accessing hard disk of E5070B/E5071B from external PC
This section describes the procedure to connect to the hard disk (D drive) in the
E5070B/E5071B to which access has been made possible according to the procedure
described in “Enabling the access form the external PC” on page 440 from the external PC,
taking Windows NT
®
as an example.
NOTE
For information on connection, see your PC's operation manual.
Step 1. From the Start menu, click Programs - Windows Explorer to start the Explorer.
Step 2. From the Explorer's menu, click
Tools - Map Network Drive...
.
Step 3. The Map Network Drive dialog box appears. Select an appropriate drive, enter
\\C_NAME\S_NAME
as the network path and then click the
OK
button.
C_NAME
in the network path is the computer name of the E5070B/E5071B and
S_NAME
is the share name of the D drive. For information on how to set the computer name, refer to
“Specifying computer name” on page 437; for information on how to set the share name,
refer to “Enabling the access form the external PC” on page 440.
Step 4. The dialog box to enter the user name and the password appears. Enter an appropriate user
name and password and then click the
OK
button.
The user name and password differ depending on the setting made when enabling access
from the external PC. When you have set them according to “Enabling the access form the
external PC” on page 440, you can make connection using the user name,
agena
, without
the password.