Agilent Technologies E5070B, User Manual

Page: 269 / 769

Chapter 6 263
Data Analysis
Searching for Positions that Match Specified Criteria
6. Da
ta
Analysis
Searching for Positions that Match Specified Criteria
You can search for a position that matches your specified criteria by using the Marker
Search feature.
Marker Search allows you to search for a position that matches any of the following
criteria.
R
Maximum value
R
Minimum value
R
Target (a point that has a target measurement value)
• Target nearest to marker position
• Target on left-hand side nearest to marker position
• Target on right-hand side nearest to marker position
R
Peak
• Maximum peak (for a positive peak), minimum peak (for a negative peak)
• Peak on left-hand side nearest to marker position
• Peak on right-hand side nearest to marker position
Setting search range
The Marker Search feature allows you to set part of the sweep range as the search target
(Partial Search feature) as well as the entire search range. For the Partial Search feature,
you can select whether to couple traces in the channel.
Procedure to Turn On/Off Trace Coupling within Search Range
Step 1. Press or to activate the channel for which you want to set the
search range.
Step 2. Press or to activate the trace for which you want to set the search
range.
Step 3. Press .
Step 4. Press
Search Range
.
Step 5. Press
Couple
to toggle on/off trace coupling within the search range.