manualshive.com logo in svg

Hach 1950Plus, Инструкция по эксплуатации инструмента, Страница: 74 / 188

Поделиться
Скачать
Hach 1950Plus Скачать руководство пользователя страница 74

Page 74
Setup Menu

UVTOCSetup and System Configuration.fm

Section 5

4.

When the desired delay time is displayed, press ENTER to place the 
value in memory.

5.2.4.5 Stream Period Screens

The stream period does not include 
the purge period. 

Setting a stream period to zero will 
force the analyzer to skip 
measurement of that stream, 
effectively making the analyzer 
single stream.

The selection of a Dual stream analyzer will add two user configurable 
screens to the Setup/Timing/Periods screens.

These times set the number of minutes the analyzer spends Online 
measuring each of the streams. The maximum time allowed is 999 minutes. 
The stream period does not include the purge period.

5.2.5 Time/Date screen

The current Time/Date setup screen is entered from the Periods screen by 
pressing the UP button.

5.2.5.1 Set Time

1.

Press the ENTER button. The Set time screen is displayed. 

2.

To change the time, press ENTER. 

3.

Asterisks will flash on either side of the time. Use the UP or DOWN 
buttons to set the time. 

4.

When finished, press ENTER. The selected time is retained in memory. 
The Set day screen is displayed.

5.2.5.2 Set Day

1.

Press UP. The Set day screen is displayed. 

2.

To change the day of the month, press ENTER. 

3.

Asterisks will flash on either side of the displayed day. Use the UP or 
DOWN buttons to select the correct day of the month. 

4.

When finished, press ENTER. The selected date is retained in memory 
and the Set month screen is displayed. 

S t r e a m   1   p e r i o d

*   2 0   m i n   *

S t r e a m   2   p e r i o d

*   3 0   m i n   *

S e t   t i m e

1 4: 33

S e t   d a y

16

Содержание 1950Plus





























































































































































































Отзывы:

Нет отзывов