GE Brivo OEC 715, Руководство по обслуживанию

Страница: 152 / 551

Brivo OEC 715/785/865 Mobile C-Arm X-Ray Product Service Manual
3-16
3.4.2. External Inspection
1.
Cabling and Connector inspection
Check the interconnect cable for damage or other problems. Verify that connector on cable mates well
with the connector on C-Arm and that there are no bent or missing pins. Make sure the strain relief
attaches securely to both the interconnect cable and connector.
Anti-Static Drag Wires
Check the system’s antistatic drag wires. There is one suspended below the Workstation
and the other one underneath the C-Arm. Both wires must be securely attached to the
system and not be encumbered by debris.
Interconnect Cable and
Connector
Check Workstation’s Interconnect Cable for damage or other problems. Verify that Lemo
Connector on cable mates well with the connector on C-Arm, and that there are no bent
or missing pins.
AC Power Cord and
Plug
Verify that the AC power cord and plug supplied with the system is the correct one for
customer facility.
2.
C-Arm Inspection
Inspect each C-Arm component listed under the heading C-Arm Inspection. Select one check box for
each item in the list. The choices are:
•
No problem Found
• Loose or missing parts
•
Broken or damaged parts
• Chipped or scratched paint
The items to inspect are grouped according to the larger visible, easily accessible assemblies and/or
modular parts of the system. Each inspection of an assembly item should include its visible component
parts and sub-assemblies.
C-Arm Inspection List:
Physical Location
No problem
found
Loose or Missing
parts
Broken or
Damaged Parts
Chipped or
Scratched paint
Image Intensifier
C-Arm
X-ray Monoblock
Control Panel
Handles
Cabinet
Wheels