Foma F903i' 06.10, Руководство пользователя

Страница: 557 / 567

56
AT+CGEQMIN
*2
Sets the criteria for judging whether to permit QoS (Quality of Service) provisioned by the
network when packet communication is established.
→
P59
AT+CGEQMIN? : Displays current settings
AT+CGEQMIN=? : Displays a list of assignable values
AT+CGEQMIN=2
OK
AT+CGEQREQ
*2
Sets QoS (Quality of Service) requested to the network at the transmission of packet
communication.
→ P59
AT+CGEQREQ? : Displays current settings
AT+CGEQREQ=? : Displays a list of assignable values
AT+CGEQREQ=3
OK
AT+CGMR Displays the FOMA terminal version.
AT+CGMR
1234567890123456
OK
AT+CGREG=<n>
*1
Sets whether to report network service registration status. The status reported is Within
service area or Out of service area.
n=0 : Not notified (default)
n=1 : When the terminal is moved from Within service area to Out of service area or vice
versa, the status is reported in the "+CGREG:<stat>" format.
stat=0 : Out of service area stat=1 : Within service area
stat=4 : Unknown
AT+CGREG? : Indicates the current settings and status in the "+CGREG : <n>, <stat>" format
AT+CGREG=? : Displays a list of assignable values
AT+CGREG=0
OK
AT+CGSN Displays FOMA terminal serial No.
AT+CGSN
123456789012345
OK
AT+CLIP=<n>
*1
When 64K data communication is received, enables display of sender's caller ID on PC.
n=0 : Does not display result (default)
n=1 : Displays result
AT+CLIP? : Indicates the current settings and status in the "+CLIP : <n>,<m>" format
m=0 : Network setting not to send caller ID when sending data
m=1 : Network setting to send caller ID when sending data
m=2 : Unknown
AT+CLIP=? : Displays a list of assignable values
AT+CLIP=0
OK
AT+CLIR=<n>
*2
When sending 64K data communication, sets whether to send phone number to the
receiver.
n=0 : Uses the setting in service agreement
n=1 : Does not send
n=2 : Sends (default)
AT+CLIR? : Indicates the current settings and status in the "+CLIR : <n>,<m>" format
m=0 : CLIR not operating (always sends)
m=1 : CLIR always operating (never sends)
m=2 : Unknown m=3 : CLIR temporary mode (default=does not send)
m=4 : CLIR temporary mode (default=sends)
AT+CLIR=? : Displays a list of assignable values
AT+CLIR=2
OK
AT+CMEE=<n>
*1
Sets whether to display an error report at the FOMA terminal.
n=0 : Displays "ERROR" and no result code (default)
n=1 : Uses result code, displaying reason as number
n=2 : Uses result code, displaying reason as alphabetic characters
Displays reasons in the "+CME ERROR : xxxx" format when n=1 or n=2 is set (xxxx =
number or alphabetic characters).
→ P58 "Error messages list"
AT+CMEE? : Displays current settings
AT+CMEE=? : Displays a list of assignable values
AT+CMEE=0
OK
AT+CNUM Displays FOMA terminal's own phone number in the "+CNUM : ,<number>,<type>" format.
number : Own phone number
type=129 : International access code + not included
type=145 : International access code + included
AT+CNUM
+CNUM : ,"+819012345678",
145
OK
AT+CR=<n>
*1
Sets whether to display the communication type before "CONNECT" is displayed during
connection.
n=0 : Does not display (default)
n=1 : Displays the communication type in the "+CR : <serv>" format
serv=GPRS : Packet communication
serv=SYNC : 64K data communication
AT+CR? : Displays current settings AT+CR=? : Displays a list of assignable values
AT+CR=0
OK
Upper slot: Command
Lower slot: Example
Description